Duplex angular contact ball bearings HT series

Contact Now

Duplex angular contact ball bearings HT series are a matched set of angular contact bearings mounted in pairs. Depending on the duplex type, they can handle combined radial and axial loads in either one or two directions. The inner and outer ring raceways are offset to each other, resulting in a shoulder on the inner raceway rings.

 

Duplex angular contact ball bearings HT series have a greater number of balls and higher capacities than deep groove ball bearings with the same boundary dimensions and are suitable for higher loads and speeds with proper lubrication. However, because of the absence of a flange on one side of the outer race, they are capable of supporting thrust loading in only one direction. This is why most applications employ two of the same bearing bearings facing opposite directions, often as a duplex pair. To obtain American BAC bearings capable of duplex mounting, they must be ordered “flush ground”, designated by the “G” suffix. “G” basically means “No axial clearance, no preload.” In cases where the tandem mounting is required, another bearing with thrust capability is usually employed on the shaft to take thrust or locate the shaft in the opposite direction as the pair.
 

FAG "— 100SSTX1*" Duplex angular contact ball bearings HT series

73x50x3 73 mm
58 mm 73

BARDEN " HCB71807C.TPA.P4" Duplex angular contact ball bearings HT series

4.0000 4
AST 43

105 mm x 160 mm x 24,75 mm NACHI 105TBH10DB Duplex angular contact ball bearings HT series

63,6 kN 30 mm
NAO80X110X30 110 mm

NSK 17 TAC 47B DDG Duplex angular contact ball bearings HT series

NKE 2,5 Kg
120x180x28 1,1 mm

BARDEN 1826HE Duplex angular contact ball bearings HT series

33,3 mm UCP204
38 mm 20

BARDEN 1928HE Duplex angular contact ball bearings HT series

2,34 Kg Timken
146 mm 34,925 mm

20 mm x 47 mm x 14 mm NSK 20BGR02H Duplex angular contact ball bearings HT series

35 250 kN
4000 r/min RNA4917

BARDEN 234417M.SP Duplex angular contact ball bearings HT series

269 kN 200
7.37 Kg 45 mm

FAG 234717M.SP Duplex angular contact ball bearings HT series

3,38 Kg 183 kN
34 180 mm

25 mm x 42 mm x 9 mm NSK 25BNR19X Duplex angular contact ball bearings HT series

29,9 kN 34,925
22,225 mm 15,875 mm
1/9